Dentcraft Tools
- One stop shop
- Grootste collectie tools
- Snelle levering
Vergelijk producten Verwijder producten
You can compare a maximum of 3 products
Double bend Interchangeable rod 24" (61 cm)
Double bend interchangeable rod with R4 tip. Meer informatie
Large tip KnockDown Ultem (Coca)
Very similar to our Acrylic knockdown - but the material is Ultem, a harder plastic. This is the larger tip diameter version, compared with the RB-SMKD. Meer informatie
Knockdown hammer with interchangeable tip 22" (55,8 cm)
This 22 inch Knock Down hammer comes with interchangeable tips on both sides of the hammers. All standard interchangeable tips will fit these hammers. The hammer comes with B4-p tips and a flat surface. Meer informatie
Brace tool Straight left 24" (61 cm), .306" diameter
Straight brace tool. Length 24 inch (60,96 cm) and 0,306 inch (7,77 mm) diameter. The length of the flag is 1-7/8 inch (4,76 cm). Meer informatie
Brace tool Right 10" (25 cm), .150" diameter
Length 10 inch (25,4 cm) and 0,150 inch (3,81 mm) diameter.
The angle bend on the tip is 90 degrees. The length of the flag is 1 inch (2,54 cm). Meer informatie
Long Flag tool Set - 2 pcs
The set includes the following products:
LF06 -Long Flag 4 inch flag by 24 inch long (Orange).
LF04 -Long Flag 6 inch flag by 24 inch long (Red). Meer informatie
Tech Set 38 pieces
Side Panel Hook 30" (76 cm), .362" diameter with 3-1/2" (9 cm) curved flag
30 inch (76,2 cm) long side panel hook tool with 3 1/2 inch (7,62 cm) curved flag and .362 inch (9,2 mm) diameter tip. Meer informatie
Door tool forward flag 22" (56 cm) with 5" (12,7 cm) flag
5/16 dia shaft w/ 5 inch Flag Meer informatie
Ultra thin Whale Tail 5" (13 cm) with 1/2" (1,27 cm) wide head
Reverse Handle Whale Tail Thin 20" (50,80 cm)
Reverse Handle Whale Tail (thin) 20 inch (50,8 cm) long with a 3/4 inch (1,9 cm) wide tip. Thickness of shaft 1/8 inch (3,17 mm) and width of shaft 1/4 inch (6.35mm). Meer informatie
Plastic tips for SMKD or LGKD
These tips are designed to work with our large and small acrylic knockdowns: LGKD and SMKD. Meer informatie
Bullet tip with hard red PVC 4/16" (6,35 mm) working diameter
Steel Mushroom tip 64/16" (101,60 mm) working diameter
Tip holder aluminium
This aluminium tip holder is a great way to hold up to 20 tips! Meer informatie
Window Shield 10" (25,40 cm) x 14" (35,56 cm)
Lexan Window Shield Laminated with velvet to protect against scratching the glass. 10 inch (25,4 cm) x 14 inch (35,5 cm). Meer informatie
Double bend Interchangeable rod 36" (91 cm)
Double bend interchangeable rod with R4 tip. Meer informatie
Single bend interchangeable tip rod 42" (106 cm) with R4 tip
Single bend interchangeable rod with R4 tip. Meer informatie
Small tip Knock Down Ultem (Coca)
Very similar to our Acrylic Knockdown - but the material is Ultem, a harder plastic. This is the smaller tip diameter version compared with the RB-LGKD. Meer informatie
Brace tool Left 14" (35 cm), .180" diameter
Length 14 inch (35,5 cm) and 0,180 inch (4,57 mm) diameter.The angle bend on the tip is 45 degrees. The angle bend on the shaft is 10 degrees. The length of the flag is 1-1/4 inch (3,18 cm). Meer informatie
Wire Set all 8" (20 cm) - 5 pcs
Door tools Set (5" flag) - 4 pcs
Wide Whale Tail Standard 24" (61 cm) with 1-1/8" (2,86 cm) wide head
1-1/8 inch (2,8 cm) Wide Whale Tail (Standard) 24 inch (54 cm) long (Turquoise) Meer informatie
Wide Whale Tail Standard 34" (86 cm) with 1-1/8" (2,86 cm) wide head
1-1/8 inch (2,8 cm) Wide Whale Tail (Standard) 34 inch (76,5 cm) long. Meer informatie