Dentcraft Tools
- Un guichet unique
- Grande collection d'outils
- Livraison rapide
Comparer les produits Comparer les produits
You can compare a maximum of 3 products
Mushroom tip Plastic Version 24/16" (38,10 mm) working diameter
Brace tool Heavy left 10" (25,40 cm), .243" diameter
Straight brace tool. Length 10 inch (25,4 cm) and 0,150 inch (3,81 mm) diameter. The length of the flag is 1 inch (2,54 cm). Informations additionnelles
Clip tool
Lisle 35400 Door Upholstery Remover Informations additionnelles
Tool Bag
Dentcraft tool bag with wheels: 122 cm x 18 cm x 18 cm. Informations additionnelles
Door Jammer
DentCraft Door Jammer holds the door open while you hammer, pull grind, sand or paint. For doors and deck lids. Holds solid. Fits any size latch. Informations additionnelles
Large tip KnockDown Ultem (Coca)
Very similar to our Acrylic knockdown - but the material is Ultem, a harder plastic. This is the larger tip diameter version, compared with the RB-SMKD. Informations additionnelles
Side Panel Hook Set - 7 pcs
Plastic tips for SMKD or LGKD
These tips are designed to work with our large and small acrylic knockdowns: LGKD and SMKD. Informations additionnelles
Hail rod 48" (121,92) with interchangeable tips, with R4 and H24 tip
The Hail rod is a 48 inch (1,22m) bar with 5/8 inch (1,59 m) diameter, includes R4 and H24 tip. Informations additionnelles
Brace tool Heavy right 6" (15,24 cm), .243" diameter
Length 6 inch (15,2 cm) and 0,243 inch (6,17 mm) diameter.
The angle bend is 45 degrees. The length of the flag is 1-1/2 inch (3,81 cm). Informations additionnelles
Whale Tail Hand tool 2" (5,08 cm), 1-1/8" (58,57 mm) tip
Hail rod 24" (60,96 cm) with interchangeble tips, with R4 and H24 tip
The Hail rod is a 24 inch (60,9 cm) bar with 5/8 inch (1,59m) diameter, includes R4 and H24 tip. Informations additionnelles
Double tipped knockdown hammer Set - 3 pcs
36" (91,44 cm) Upsized Hail rod 1/2" (1,27 cm) diameter
The hail rod is a 36 inch (91,44 cm) that has a 1/2 inch (12,7 mm) diameter and has a ball tip on the end that is 1/4 inch (6,35 mm) in size. This tool is up-sized and has a bigger diameter than the normal Hail Rod 36 inch (91 cm). Informations additionnelles
Knockdown hammer with interchangeable tip 12" (30,4 cm)
This 12 inch Knock Down hammer comes with interchangeable tips on both sides of the hammers. All standard interchangeable tips will fit these hammers. The hammer(s) come with B4-p tips and a flat surface. Informations additionnelles
Brace tool Heavy left 6" (15,24 cm), .243" diameter
Straight brace tool. Length 6 inch (15,2 cm) and 0,243 inch (6,17 mm) diameter. The length of the flag is 1-1/2 inch (3,81 cm). Informations additionnelles
Door tool left forward flag 22" (55.80 cm) with 3.5" (8,89 cm) flag
Door tool left forward with 3.5 inch (8.89 cm) flag and 22 inch (55.8 cm) over all length. Informations additionnelles
Wire Hand tool Small 4" (10,16 cm), 3/16" (4,76 mm)"meter
4 inch (10,16 cm) hand tool. Informations additionnelles
Extension 1" (2,54 cm)
Collapsible Rod Set with Interchangeable tips - 8 pcs
Small tip Knock Down (Clear)
Wire Set all 36" (91,44 cm) - 6 pcs
Ultra thin Whale Tail 10" (25,40 cm) with 1/2" (1,27 cm) wide head
Large tip Knock Down Delrin (Black)
Very similar to our Acrylic knockdown - but the material is Delrin. This is the larger tip diameter version compared with the BK-SMKD. Informations additionnelles