Dent Bench hood stand
The Dent Bench is perfect for hoods. It has caster wheels so you can move it when you are not using it. It is fold up and down in less than a few minutes.
Table size: 0.95 cm x 100 x 90 cm
Folded: 50 x 90 cm
Advise how to use and maintain your Dentbench
It is recommended to grease the threads on legs when assembling the bench for the first time and should be lubricated regularly.
Caution is advised when lifting the pdr bench, weight 22 kg / 48 lbs.
The center bed bolts, pivot locks, and leg knobs should NOT be over-tightened.
It is recommended to use 1/8 size lashing strap when attaching panels to the sofa, use pre-drilled holes on the bottom of the swing arms for best results.
DO NOT use a swivel knobs, leg knobs, handle or latches to tie panels down.
It is recommended to use a leg strap when repairing heavy panels, just wrap the strap click around all 4 legs and adjust.
The bench is loadable up to 70kg / 551bs and is also not designed for standing or sitting.
Bench height must not exceed 1.3 meters (4 1/2 ft)
Caution is advised when moving the pdr bench on an uneven surface.
Wheel maintenance, check wheel bolt regularly for tightness, can come loose with overuse, it is located under wheel locks.
Bearings also need to be lubricated regularly.